Moty’s M747 is developed as a coolant for all motor sports exposed to high-temperature and high-load conditions. While achieving high cooling performance under harsh conditions exposed to high-temperature and high-load conditions, it also secures a rare freezing temperature as a racing coolant of -34℃ and completes as a long life all-season coolant. On the other hand, In order to take all possible measures for the environment, the use of silica, amine, and phosphorus compounds that can be subjected to regulation is eliminated, it has high metal corrosion prevention and anti-foaming properties based on ethylene glycol which is not subject to the PRTR Law.
・ Usage : In order to maximize the performance of M747, it is recommended to replace all of them. If there is dirt inside the radiator, use an M750 or M668 to clean it.
 

Moty’s M750 can be expected to have a high specific heat and heat conduction effect when used in radiators, etc., because of its an infinitely pure state by removing impurities such as minerals normally contained in water to the utmost limit.
When used in radiators, unlike chemical cleaning agents, the effect of gently containing and dissolving rust and deposits inside, and cleaning the inside of radiators can be expected.
 

This product is a non-emulsion type, biodegradable cooling additive aimed at preventing problems due to poor lubrication of water pumps, which is a concern when water is used instead of general glycol-based coolants. By adding it to M750 (cooling water), even better cleaning and cooling properties are exhibited. It has excellent cooling and lubricity, and is ideal for racing and sports driving with high thermal load.

・  Usage : Add 50 to 100 mL of the cooling water additive to the radiator capacity of 8 to 10 L
■Precautions for use■
・ This product does not lower the freezing temperature. Please be careful about freezing in cold weather.
・ It is not a product intended for long-term rust prevention, so it is recommended to use it for a short period of time.

It is a radiator flushing additive developed to remove rust, scale, etc. generated in the radiator in a short time.

・ Usage : Add one bottle (300mL) of this product to 5 to 10L of cooling water, and replace the cooling water after idling for about 30 minutes after the water temperature rises.